|
|||
|
5/12 Malcolm Court Kealba VIC 3021 "Challenge your Boundaries" |
If you hit the track hard then there's a chance that you'll crack or bend the diff housing. Laminating the front diff will reduce this from occurring. Top and bottom part of the diff housing is braced at vulnerable points.
For bigger suspension lifts, you can take the option of welded castor plates.
The front diff is vulnerable to rocks and other obstacles on the tracks.
Note the workmanship from On Track 4x4.
Laminated diffs are powder coated for a clean and long lasting finish.
There's very little chance of bending an axle on this vehicle.
The contact point for the bump stop is extended to protect the shocks.
